How to Care for Your New Asphalt Driveway

April 13, 2018 3:19 am Published by Leave your thoughts

So, you’ve finally decided to replace that old, cracked asphalt driveway. A new driveway will provide both a smoother ride and a nicer appearance—as long as it is properly maintained. The goal is to keep the driveway looking great for years to come. Asphalt is one of the best materials for a strong, long-lasting driveway, but failing to take the proper steps to protect your new asphalt can lead to major problems in the future.

Here are a few tips to keep your new driveway in great shape:

  • Keep clear: Keep all car and pedestrian traffic off of the driveway for at least three days after it is installed by a professional asphalt contractor in Lufkin, TX. You’ll likely want to wait an additional two to three days if your home is located in an area that’s prone to especially hot temperatures.
  • Watch out for tire tracks: The asphalt will continue to harden and cure for about six months to a year after it is installed. During that time, the material will remain relatively soft and pliable. The asphalt will soften and harden based on any fluctuations in temperature. Vehicle tires can actually leave marks in the soft asphalt during the hot summer months. Unfortunately, there is not much you can do to reverse the damage once the marks have been made. Try not to make any tight or sharp turns to avoid leaving a permanent divot in your brand-new asphalt.
  • Construction equipment: Keep heavy construction equipment off of the new asphalt at all costs! The weight of the oversized vehicles will leave a permanent depression in the surface of the new blacktop. These divots are irreversible.
  • Avoid driving on the edges: Driving on the outer edges of a new asphalt driveway will cause it to crack and crumble due to a lack of side support. Once the driveway is completely cured, build up the edges with topsoil to prevent any future damage.
  • Clean oil spots quickly: Oil spots aren’t a major problem as long as they are immediately cleaned up. Oil that’s left to sit for too long will stain the asphalt and cause it to become gummy. Over time, the asphalt will become soft in the stained areas if it’s not cleaned up quickly.
  • Clean up ice melting products: Feel free to use salt and other ice melting products liberally as they will not affect the new asphalt. They are known to stain asphalt, though, so it’s important to spray the materials off once the ice has melted away.
  • Fill cracks quickly: Cracks could develop in the asphalt during the winter as the ground contracts and expands. Take special care to have the cracks filled by a professional to prevent them from expanding and spreading.

After one year, your paving contractor will seal the driveway with a tar sealant to help protect the surface of the asphalt from any gas or oil spills. As the top experts in asphalt paving in Lufkin, TX, Brown’s Paving and Excavation will help keep your new driveway looking great for years to come. Call us today for more information!

Categorised in: ,

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *